Polyethylene geomembranes are classified by density. They are made from the same raw material, but as density changes, so do the stiffness, flexibility and chemical resistance of the liner. This article explains the HDPE, LLDPE and VLDPE classes with their density values.
Why does density matter?
Density indicates how crystalline the polyethylene is. As density rises the material becomes stiffer and its tensile strength and chemical resistance increase. As density falls the material becomes more flexible and stretches further before it breaks.
Geomembrane classes by density
| Type | Density | Key property |
|---|---|---|
| HDPE | ≥ 0.940 g/cm³ | Stiff, high chemical resistance |
| LLDPE | ≤ 0.939 g/cm³ | Flexible, high elongation |
| VLDPE | < 0.915 g/cm³ | The most flexible class |
HDPE
HDPE (high-density polyethylene) is the class with a sheet density of 0.940 g/cm³ or higher; the international GRI-GM13 specification defines it. The raw resin has a lower density; adding carbon black brings the product into this range. It is preferred where chemical resistance matters, such as landfill base liners and mining sites. Details: HDPE geomembrane.
LLDPE
LLDPE (linear low-density polyethylene) is the class with a sheet density of 0.939 g/cm³ or lower; the GRI-GM17 specification defines it. Being more flexible, it is used on ground where settlement is expected, in caps and in ponds. Details: LLDPE geomembrane.
VLDPE
VLDPE (very low-density polyethylene) is the class with a density below 0.915 g/cm³. It has the lowest crystallinity and the highest flexibility of the polyethylene types, and is used where great flexibility is needed, such as tunnel waterproofing.
Why is LDPE not used as a geomembrane?
Conventional LDPE (low-density polyethylene) has a long-chain branched structure; its stress crack resistance and mechanical properties are weak. Geomembranes are therefore made from linear LLDPE instead. When the market says "LDPE geomembrane", the product meant is usually LLDPE.
Which one for which project?
- Where chemical resistance and strength come first: HDPE
- Where settlement, uneven surfaces or flexibility come first: LLDPE
- For special applications that need very high flexibility: VLDPE
To identify the right density and thickness for your project, send us your details using the form below.
